| 说明 DESCRIPTION | 单位 UNIT | TH90 | ||
|---|---|---|---|---|
| A | B | C | ||
| 注射装置 Injection Unit | ||||
| 螺杆直径 Screw diameter |
mm | 30 | 35 | 40 |
| 螺杆长径比 Screw L/D ratio |
L/D | 23.5 | 22 | 19.2 |
| 理论注射容积 Theoretical shot volume |
cm³ | 120 | 163 | 214 |
| 注射重量 Shot weight PS |
g | 109 | 149 | 194 |
| 注射压力 Injection pressure |
MPa | 283 | 208 | 160 |
| 螺杆转速 Max screw speed |
rpm | 240 | 240 | 240 |
| 锁模系统 Clamping Unit | ||||
| 锁模力 Clamping force |
KN/T | 900/90 | ||
| 开模行程 Opening stroke |
mm | 345 | ||
| 拉杆内间距 Distance between tie bars |
mm | 370 × 370 | ||
| 最大模厚 Max. mold height |
mm | 380 | ||
| 最小模厚 Min. mold height |
mm | 170 | ||
| 顶出行程 Ejector stroke |
mm | 91 | ||
| 顶出力 Ejector force |
KN | 38 | ||
| 其它 OTHERS | ||||
| 伺服马达功率 Servo drive power |
kW | 15 | ||
| 电热功率 Heating capacity |
kW | 7.2 | ||
| 油箱容积 Oil tank capacity |
Litre | 157 | ||
| 外形尺寸 Machine dimensions |
m | 4.1 × 1.1 × 1.8 | ||
| 机器重量 Machine weight |
t | 3.5 | ||
| 说明 DESCRIPTION | 单位 UNIT | TH90 | ||
|---|---|---|---|---|
| A | B | C | ||
| 注射装置 Injection Unit | ||||
| 螺杆直径 Screw diameter |
mm | 30 | 35 | 40 |
| 螺杆长径比 Screw L/D ratio |
L/D | 23.5 | 22 | 19.2 |
| 理论注射容积 Theoretical shot volume |
cm³ | 120 | 163 | 214 |
| 注射重量 Shot weight PS |
g | 109 | 149 | 194 |
| 注射压力 Injection pressure |
MPa | 283 | 208 | 160 |
| 螺杆转速 Max screw speed |
rpm | 240 | 240 | 240 |
| 锁模系统 Clamping Unit | ||||
| 锁模力 Clamping force |
KN/T | 900/90 | ||
| 开模行程 Opening stroke |
mm | 345 | ||
| 拉杆内间距 Distance between tie bars |
mm | 370 × 370 | ||
| 最大模厚 Max. mold height |
mm | 380 | ||
| 最小模厚 Min. mold height |
mm | 170 | ||
| 顶出行程 Ejector stroke |
mm | 91 | ||
| 顶出力 Ejector force |
KN | 38 | ||
| 其它 OTHERS | ||||
| 伺服马达功率 Servo drive power |
kW | 15 | ||
| 电热功率 Heating capacity |
kW | 7.2 | ||
| 油箱容积 Oil tank capacity |
Litre | 157 | ||
| 外形尺寸 Machine dimensions |
m | 4.1 × 1.1 × 1.8 | ||
| 机器重量 Machine weight |
t | 3.5 | ||
| 说明 DESCRIPTION UNIT | 单位 | TH90 | ||
|---|---|---|---|---|
| A | B | C | ||
| 注射装置 Injection Unit | ||||
| 螺杆直径 Screw diameter |
mm | 30 | 35 | 40 |
| 螺杆长径比 Screw L/D ratio |
L/D | 23.5 | 22 | 19.2 |
| 理论注射容积 Theoretical shot volum |
cm³ | 120 | 163 | 214 |
| 注射重量 Shot weightPS |
g | 109 | 149 | 194 |
| 注射压力 Injection pressure |
Mpa | 283 | 208 | 160 |
| 螺杆转速 Ma x screw speed |
rpm | 240 | ||
| 锁模系统 Clamping Unit | ||||
| 锁模力 Clamping force |
KN/T | 900/90 | ||
| 开模行程 Opening stroke |
mm | 345 | ||
| 拉杆内间距 Distance between tie bars |
mm | 370 × 370 | ||
| 最大模厚 Max. mold height |
mm | 380 | ||
| 最小模厚 Min. mold height |
mm | 170 | ||
| 顶出行程 Ejector stroke |
mm | 91 | ||
| 顶出力 Ejector force |
KN | 38 | ||
| 其它 OTHERS | ||||
| 伺服马达功率 Servo drive power |
kw | 15 | ||
| 电热功率 Heating capacity |
kw | 7.2 | ||
| 油箱容积 Oil tank Capacity |
Litre | 157 | ||
| 外形尺寸 Machine dimensions |
m | 4.1 × 1.1 × 1.8 | ||
| 机器重量 Machine weight |
t | 3.5 | ||
